Set delivery location Support
Brands
Mastech

Mastech MS 8910 Smart SMD Tester

SKU: MS8910
Rs. 2,000.00 MRP Rs. 3,000.00 Save Rs. 1,000.00 (34% off) Inclusive of GST-18%
In Stock (27 available) Delivery 2-6 days MOQ 1 piece Technical datasheet (PDF)
Quantity to add

Mastech MS8910 Smart SMD RC Resistance Capacitance Meter tester Auto Scan

 

Auto Scanning & Auto Ranging function. Therefore, fully automatic detecting the chip type resistance, capacitance or diode measurement. The construction of tester is compact and small type. So it as portable Testing set. The test leads is special construction and fixed on the main body for convenience of user.

Product information

Everything you need to know

Technical Specifications

Small size and light weight, handheld and portable test tool.

Used to measure SMD, such as Chip resistor, Chip capacitor and Chip diode devices.

Auto scanning, it identifies resistor, capacitor and diode automatically.

Continuity testing. When the resistance is less than 30O, it will sound.

Certificate: EMC.



operating temperature:0 to 40 Celsius degree Operating humidity:<80%RH Storage temperature:-10 to 50 Celsius degree Storage humidty:<70%RH Auto scanning range:300.0O to 3.000MO Manual measuring range:300.0O to 30.00MO Auto scanning range:3.000nF to 300.0?F Manual measuring range:3.000nF to 30.00mF Item size:17.5 * 3.1 * 1.7cm/ 6.8 * 1.2 * 0.6in Item weight:46g/ 1.6oz Package size:20.4 * 5.8 * 2.8cm/ 8 * 2.2 * 1.1in Package weight:142g/ 5oz Packing list: 1 * SMD tester 2 * Backup test pins 1 * Storage box 1 * User manual

Warranty
As per Mastech's policy

Recommended Uses

Surface mount devices are usually tiny and without wire leads, making it much more difficult to test and identify SMD than conventional components. The MS8910 gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging. Precise tips made of non-magnetic steel are able to pick and reliably contact even smallest SMD components or take measurements from the device already mounted on a board. The probe can also be used to test conventional components with wire leads too short to insert into the test terminals. The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there arechip type resistor, chip type capacitor and diode, for example. Moreover, the tester have the continuity checking function The tester is automatically identified the passive component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection. The tester is designed to meet IEC1010-1 standard and stipulation of 2-poulation grade. The tester conform to the European Union’s following requirement. CE regulation 89 or 336 (EMC Electromagnetic Compatibility). The entire outer surface of the tester case has been with thermo plastic elastomer and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty. This operating instruction covers information on safety and caution, so please read relevant information carefully and observe all the warming and note strictly.