Set delivery location Support
Brands
FNIRSI Authorized brand

FNIRSI TC3 Digital Oscilloscope Transistor Tester Function Signal Generator 3 in 1

SKU: TC3FNI
Rs. 5,995.00 MRP Rs. 6,500.00 Save Rs. 505.00 (8% off) Inclusive of GST-18%
In Stock (4 available) Delivery 2-6 days MOQ 1 piece Technical datasheet (PDF)
Quantity to add

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability

  • The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.
  • With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.
  • Maximum measured voltage signal is 400 V.
  • Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments

 Functions (Component Tester)

  • Automatically analyse NEC protocol infrared code.
  • Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

 Functions (Signal Generator)

  • The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.

 Included

1x DSO-TC3,1x P6100 Oscilloscope Probe (100 MHz),3x Test Hooks,1x Adapter,1x USB-C Cable,1x Original Manual by FNIRSI 

ToolWorld Lowest Price Gaurantee

Product information

Everything you need to know

Technical Specifications

Real-time sample rate     10 MSa/s

Bandwidth          500 khz

Input resistance 1 MΩ

Coupling method             AC/DC

Test voltage range            400 V

Vertical Sensitivity (x1)   10 mV-10 V

Horizontal time base range           1us-10s

Trigger mode      Auto/Normal/Single

Trigger type        Rising edge/Falling edge.

Waveform Freeze             Yes

Automatic measurement              Yes

Specifications (Signal Generator)

Sine wave            1-100 KHz/0-3.3 V/50%

Square wave      1-100 KHz/3.3 V/50%

Pulse wave          1-100 KHz/3.3 V/0-100%

Triangle wave     1-100 KHz/0-3.3 V/50%

Ramp    1-100 KHz/0-3.3 V/0-100%

DC          0-3.3 V

Warranty
Covered against manufacturing defect

Recommended Uses

DIY Learning, Appliance Repair, Power measurement