HIOKI BT3554-51 Battery Tester

Resistance measurement range  3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges

Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)

Testing source frequency: 1 kHz ±30 Hz

With function for avoiding noise frequency enabled: 1 kHz ±80 Hz

Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range)

Open terminal Voltage: 5 V peak

Voltage measurement range        ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt

Temperature measurement accuracy       Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C  (±1.8°F)

                                                               * When using the Clip Type Lead with Temperature Sensor 9460.

                                                               * When using the Temperature Probe 9451, add ±0.5°C (±0.9°F) (cable length: 1.5 m [59.1"]).

                                                               * When using the Temperature Probe 9451S, add ±0.5°C (±0.9°F) (cable length: 0.1 m [3.94"])

Absolute max. input voltage        60 V DC max. (No AC input)

Measurement time          100 ms

Response time   Approx. 1.6 sec.

Comparator        Compares measured values with set threshold values to make judgments and reports them to the user.

                             Judgment notification method: Results are displayed as shown below (segment) and beeping tones sound.

                             When the Voltage value (high): Resistance value (low)= PASS, Resistance value (medium)= WARNING, Resistance value (high)= FAIL

                             When the Voltage value (low): Resistance value (low)= WARNING, Resistance value (medium)= WARNING, Resistance value (high)= FAIL

                             If the judgment result is WARNING or FAIL, the audio tone is accompanied by a red backlight.

                             User-selectable voltage judgment method: ABS (absolute value judgment), POL (polarity judgment)

                             Savable settings: 200 tables

Communication interface              USB

                                                     Bluetooth® wireless communications (when Z3210 installed)

Other functions Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock

Power supply     LR6 (size AA) alkaline battery ×8

Rated supply voltage: 1.5 V DC × 8

(Nickel metal hydride batteries may be used. However, the battery life display is not supported in this configuration.)

Continuous operating time: Approx. 8.3 hr. (without Z3210 installed), Approx. 8.2 hr. (with Z3210 installed and wireless communications active)

Dimensions and mass     199 mm (7.83 in) W × 132 mm (5.20 in)H × 60.6 mm (2.39 in)D (with protector), 960 g (33.9 oz) (including batteries and protector)

Included accessories       Carrying Case C1014 ×1, Protector Z5041 ×1, Fuse Set Z5050 ×1, 0 Adj Board ×1, Neck strap ×1, USB cable ×1, Application software CD (GENNECT One) ×1, AA alkaline battery (LR6) ×8, User Manual ×1