Set delivery location Support
Brands
HIOKI

HIOKI DT4255 Digital Multimeter

SKU: DT4255
Rs. 11,510.00 MRP Rs. 14,000.00 Save Rs. 2,490.00 (18% off) Inclusive of GST-18%
In Stock (5 available) Delivery 2-6 days MOQ 1 piece Technical datasheet (PDF)
Quantity to add

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement terminals that are protected by a fuse.

  • Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor (DT4255)
  • Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
  • Prevents accidents with clamp-on sensor-based current measurement (DT4255)
  • Broad -25°C to 65°C (-13°F to 149°F) operating temperature range (DT4255)
  • Voltage detection function
  • Dual display lets you check voltage and frequency simultaneously

 

Product information

Everything you need to know

Technical Specifications

DC Voltage range              600.0 mV to 1000 V

5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt.

AC Voltage range              6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz

Basic accuracy 40 - 500 Hz: ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)

AUTO AC/DCV   Yes

Resistance range               600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt.

DC Current range              N/A

From 4 to 20mA Percentage conversion display   N/A

AC Current range

(use with Clamp on probes)         10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz: ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)

Temperature

(thermocouples)              N/A

Voltage detection             Hi: AC40 V to 600 V, Lo: AC80 V to 600 V

Capacitance range            1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.

Frequency range               99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),

Basic accuracy: ±0.1 % rdg. ±1 dgt.

Continuity check               Continuity threshold [ON]: 25 Ω or less,

[OFF]: 245 Ω or more,

Response time: 0.5 ms or more

Diode test            Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less,

Threshold of forward voltage: 0.15 V to 1.5 V

Other functions Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option)

Display  Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph

Display refresh rates        5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)

Power supply     LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)

Dimensions and mass     84 mm (3.31 in) W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,

390 g (13.8 oz) (including batteries and holster)

Included accessories       Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

Warranty
3 years

Recommended Uses

Industrial uses